Made in the USA
Ductless Fume Hood
Ductless Fume Hoods, manufactured by Sentry Air Systems, offer a portable, easy-to-maintain solution that protects your lab personnel from harmful types of carbon, airborne fumes and chemicals. Typically used in locations where outside ventilation isn’t possible or will be costly to install, the ductless fume hood produces a recirculating air pattern filtered through high efficiency air filters and requires no external ducting or venting.
Model # SS-XXX-XXX
Unit Configurations Quick Compare
Additional Configuration
What is a Ductless Fume Hood?
A ductless fume hood is a stand alone, compact workstation that provides a continuous flow of air that filters hazardous fume vapors out, recirculating clean air back into your working environment. Because the air is recirculated, no exterior ducting or makeup air is necessary. These air filtration systems are designed to keep harmful airborne contaminants away from the operator's respiratory zone while they work within the hood.
Also referred to as exhaust hoods, these containment systems are used for a variety of applications including chemical fume control, powder and dust removal, solvent vapor control, pharmaceutical powder filling, light grinding, acid gas fumes, anesthesia gas containment, epoxy fume control and other applications that produce hazardous particulates and fumes.
How does a Ductless Fume Hood work?
Ductless Fume Hood vs Ducted Fume Hood
Ductless fume hoods offer several key advantages when weighing your options versus a ducted fume hood:
- No costly ducting or venting
- No permitting issues for venting outside of the building (ie. EPA air sampling)
- Adaptable (mobility and ease in change of layout)
- Environmentally friendly
- Significant energy cost savings
However, a ductless fume hood may not be suitable for the application being practiced as there are certain features of a ducted hood that may suit your needs more:
- Certain chemicals/gases carry a low molecular weight and are not efficiently captured through a carbon filter (ie. methane, butane, propane gas)
- Loading: the amount of uses per time frame may require us to directly vent outside versus running through a particular filter “too much”
- For example: If your application is using acetone gas and evaporating gallons per day, running it through a carbon filter in excess may saturate it past an effective point, rendering it to be useless or replaced at a significant rate.
- Dangerous chemicals that need to be vented outside per regulations of OSHA. NIOSH
Benefits of a Ductless Fume Hood
- Minimal installation costs—no external ducting or venting
- Portable
- Minimal maintenance
- Environmentally friendly
- Significant energy cost savings
- No permitting issues for venting outside (ie. EPA air sampling)
- UL-certified: Our line of Deluxe Ductless Fume Hoods is UL-certified. UL-certified products have been third-party verified for electrical and operator safety. File number: E466130 for US and Canada.
Fume Hood Safety Considerations
Safe operation of your fume hood is critical to protecting your staff and anyone around it. A ductless fume hood should only be considered for use in labs with low hazard chemicals.
- They should be visually inspected frequently
- Pedestrian traffic in front of the hood should be limited
- Any bulky equipment should be placed at the rear of the hood
- To allow for airflow, large equipment should be raised at least 2” off the surface
- If your fume hood is used often, a regular cleaning schedule should be established
Sentry Air invests in certification processes and independent testing performed by a Nationally Recognized Testing Laboratory (NRTL) prior to offering any air infiltration products.
200 Series
Product Video
Hood Dimensions:
- O.D: 10.4"D x 13"W x 10.6"H
- I.D.: 9.6"D x 11.6"W x 10.2"H
Hood Material:
- Acrylic
Motor:
Fractional Horsepower
Weight:
Approx. 15 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
11" L x 8" W x 9"
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 100 FPM
Pre-filter & Heavy-duty Carbon Filter - 60 FPM
Electrical:
115/1/60, .3 amps
220/1/50, .2 amps
Sound Level:
55 dba @ 3 ft. from hood inlet
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- O.D.: 18.5"D x 20" W x 19"H
- I.D.: 18"D x 18"W x 18"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 35 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
- (2) 4" Round x 48" Long fire retardant flex hose
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 100 FPM
Pre-filter & Heavy-duty Carbon Filter - 60 FPM
Electrical:
115/1/60, .3 amps
220/1/50, .2 amps
Sound Level:
55 dba @ 3 ft. from hood inlet
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Standard
Hood Dimensions:
- O.D: 24” D x 26” W x 25” H
- I.D.: 23.5 “D x 24”w x 24” H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
- Front Window: .250" Clear Polycarbonate
Blower Dimensions:
13" L x 13" W x 14.5" H
Total Weight:
Approx. 90 lbs
Motor:
Fractional Horsepower
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 100 FPM
Pre-filter & Heavy-duty Carbon Filter - 60 FPM
Electrical:
115/1/60, .3 amps
220/1/50, .2 amps
Sound Level:
55 dba @ 3 ft. from hood inlet
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty: Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
High Flow
Hood Dimensions:
- O.D: 24” D x 26” W x 25” H
- I.D.: 23.5 “D x 24”w x 24” H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
- Front Window: .250" Clear Polycarbonate
Blower Dimensions:
13" L x 13" W x 14.5" H
Total Weight:
Approx. 100 lbs
Motor:
Fractional Horsepower
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 100 FPM
Pre-filter & Heavy-duty Carbon Filter - 60 FPM
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty: Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- O.D: 24"D x 32"W x 25"H
- I.D.: 23.5"D x 30"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 100 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
13" L x 13" W x 14.5" H
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 130 FPM High; 25 FPM Low
Pre-filter & Heavy-duty Carbon Filter - 115 FPM High; 20 FPM Low
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- O.D: 24"D x 42"W x 25"H
- I.D.: 23.5"D x 40"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 100 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
13" L x 13" W x 14.5" H
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 130 FPM High; 25 FPM Low
Pre-filter & Heavy-duty Carbon Filter - 115 FPM High; 20 FPM Low
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- O.D: 24"D x 52"W x 25"H
- I.D.: 23.5"D x 50"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 125 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
13" L x 13" W x 14.5" H
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 105 FPM
Pre-filter & Heavy-duty Carbon Filter - 80 FPM
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- O.D: 24"D x 62"W x 25"H
- I.D.: 23.5"D x 60"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 140 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
13" L x 13" W x 14.5" H
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 100 FPM
Pre-filter & Heavy-duty Carbon Filter - 70 FPM
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Standard
Hood Dimensions:
- O.D: 24"D x 72W" x 25"H
- I.D.: 23.5"D x 70"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
- Front Window: .250" Clear Polycarbonate
Blower Dimensions:
13" L x 13" W x 14.5" H
Total Weight:
Approx. 155 lbs
Motor:
Fractional Horsepower
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 100 FPM
Pre-filter & Heavy-duty Carbon Filter - 70 FPM
Electrical:
115/1/60, .3 amps
220/1/50, .2 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty: Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
High Flow
Hood Dimensions:
- O.D: 24"D x 72W" x 25"H
- I.D.: 23.5"D x 70"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
- Front Window: .250" Clear Polycarbonate
Blower Dimensions:
13" L x 13" W x 14.5" H
Total Weight:
Approx. 205 lbs
Motor:
Fractional Horsepower
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 170 FPM
Pre-filter & Heavy-duty Carbon Filter - 115 FPM
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty: Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- O.D.: 24"D x 32"W x 25"H
- I.D.: 23.5"D x 30"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 100 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
13" L x 13" W x 14.5" H
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 100 FPM
Pre-filter & Heavy-duty Carbon Filter - 60 FPM
Electrical:
115/1/60, 2 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- O.D: 24"D x 42"W x 25"H
- I.D.: 23.5"D x 40"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 100 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
13" L x 13" W x 14.5" H
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 130 FPM High; 25 FPM Low
Pre-filter & Heavy-duty Carbon Filter - 115 FPM High; 20 FPM Low
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- O.D: 24"D x 52"W x 25"H
- I.D.: 23.5"D x 50"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 125 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
13" L x 13" W x 14.5" H
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 105 FPM
Pre-filter & Heavy-duty Carbon Filter - 80 FPM
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- O.D: 24"D x 62"W x 25"H
- I.D.: 23.5"D x 60"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 140 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
13" L x 13" W x 14.5" H
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 100 FPM
Pre-filter & Heavy-duty Carbon Filter - 70 FPM
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Standard
Hood Dimensions:
- O.D: 24"D x 72W" x 25"H
- I.D.: 23.5"D x 70"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
- Front Window: .250" Clear Polycarbonate
Blower Dimensions:
13" L x 13" W x 14.5" H
Total Weight:
Approx. 155 lbs
Motor:
Fractional Horsepower
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 100 FPM
Pre-filter & Heavy-duty Carbon Filter - 70 FPM
Electrical:
115/1/60, .3 amps
220/1/50, .2 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty: Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
High Flow
Hood Dimensions:
- O.D: 24"D x 72W" x 25"H
- I.D.: 23.5"D x 70"W x 24"H
Hood Material:
- Sides: .250" White Acrylic
- Base: .500" White High Density Polyethylene
- Top: .500" Clear Polycarbonate
- Front Window: .250" Clear Polycarbonate
Blower Dimensions:
13" L x 13" W x 14.5" H
Total Weight:
Approx. 205 lbs
Motor:
Fractional Horsepower
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters
Approximate Inlet Velocities:
Pre-filter & 99.97% HEPA Filter - 170 FPM
Pre-filter & Heavy-duty Carbon Filter - 115 FPM
Electrical:
115/1/60, 2 amps
220/1/50, .75 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty: Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- Outer: 24” x 31.5” x 25”
- Interior: 23.5” x 29.5” x 23.75”
- Access Area: 29.5” x 9.25”
Hood Material:
- 16 Ga. carbon steel w/ polyester epoxy coating
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 45 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
17.3" L x 29.7" W x 15.8" H
Approximate Inlet Velocities:
35-155 FPM (varies with filter media)
Electrical:
115/1/60, 2 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- Outer: 24” x 41.5” x 25”
- Interior: 23.5” x 39.5” x 23.75”
- Access Area: 39.5” x 9.25”
Hood Material:
- 16 Ga. carbon steel w/ polyester epoxy coating
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 45 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
17.3" L x 29.7" W x 15.8" H
Approximate Inlet Velocities:
35-155 FPM (varies with filter media)
Electrical:
115/1/60, 2 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Product Video
Hood Dimensions:
- Outer: 24” x 41.5” x 25”
- Interior: 23.5” x 39.5” x 23.75”
- Access Area: 39.5” x 9.25”
Hood Material:
- 16 Ga. carbon steel w/ polyester epoxy coating
Front Windows:
0.250" Clear Polycarbonate
Motor:
Fractional Horsepower
Total Weight:
Approx. 45 lbs.
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Blower Dimensions:
17.3" L x 29.7" W x 15.8" H
Approximate Inlet Velocities:
35-155 FPM (varies with filter media)
Electrical:
115/1/60, 2 amps
Sound Level:
61 to 66 dba (Blower Speed: Low to High)
Max Operating Temperature:
Not to exceed 170 degrees Fahrenheit
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197
Quick Compare
Basic Hood
|
Deluxe Hood
|
Advanced Hood
|
|
|---|---|---|---|
| Auto Sentry automated airflow control: | |||
| Adjustable LED light: |
|
|
|
| Digital displays: | - Pressure reading |
- Room conditions (temperature and humidity) - Accumulated filter runtime - Real-time pressure display |
|
| Upgraded Hinges: | |||
| Variable speed controller: | |||
| Hood Material: |
Accessories
SS-000-HC
Displays hours unit has
been in operation.
SS-025-CSW
Surface disinfectant
and decontaminant cleaner.
SS-300-MAG
Available Filters
- HEPA - Up to 99.97% efficient on particles down to 0.3 microns
- ASHRAE - Up to 95% efficient on particles down to 0.5 microns
- ULPA - Up to 99.9995% efficient on particles down to 0.12 microns
- Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical
Features and Benefits
Environmentally-Friendly: In many cases, ducted exhaust hoods empty extracted fume and particulate directly outdoors without sending it through a filtration system first. Ductless Fume Hoods trap hazardous particulate in filters so they can be disposed of properly.
Energy Efficiency/Cost Efficiency: Ductless Fume Hoods recirculate existing room air, while externally ducting systems remove heated, cooled, or dehumidified air outdoors, which requires that air to be replaced. This has the potential to waste energy and increase cost.
Minimal Maintenance & Installation Requirements/Easy Mobility: While externally ducting exhaust hoods require complicated installation because of ducting construction, Ductless Fume Hoods can be up and running with minimal installation. They are essentially “plug and play” solutions. Ductless Containment Hoods do not require any ducting or external venting and can be moved from location to location with relative ease. The only maintenance requirements are replacing saturated filters and wiping the hood down with appropriate cleaning supplies from time to time.
