|
|
|
Dust and Fume Extractor
Mounted Sentry Double
SS-400-MSD
|
|
 |
|
The Mounted Sentry Double Fume Extractor is a cost effective choice for limited workspace environments where efficient air filtration is desired. Two
self-supporting flex arms and a powerful fan combine to provide strong suction for the source capture of airborne contaminants, such as solder fumes, while under the table mounting frees up much needed workbench space.
The powerful fan on top of the hood combines with a variety of Hepa filters
and carbon filters to provide strong suction accross the inlet area. Typical uses may include soldering, powder filling,
and a variety of applications involving chemical fumes and dusts.
The Mounted Sentry Double for Fume Extraction can provide an effective and economical solution for many commercial,
medical, laboratory and industrial applications.
|
SPECIFICATIONS
Cabinet Dimensions: |
20" D x 20" W x 14" H |
Arm Dimensions: |
Qty 2, 4" D x 48" L fire retardant flex hose |
Weight: |
50 lbs to 100 lbs. (Depends on Filter Media Used) |
Cabinet Material: |
16 ga. carbon steel |
Motor: |
Fractional Horsepower |
Air Volume: |
Pre-Filter & 99.97% Hepa Filter - 350 CFM
Pre-Filter & Heavy-Duty Carbon Filter - 200 CFM |
Electrical: |
115/1/60, 2.4 amps |
Sound Level: |
Approx. 60 dba @ 3' |
Warranty: |
Limited two-year warranty from date of shipment on defects due to materials or workmanship. |
Patented Design: |
U.S. PATENT #5,843,197
|
|
All specifications are nominal and subject to change without notice.
Not intended for explosive or highly flammable applications. (i.e. when the Lower Flammability Limit is exceeded for any given chemical).
Please consult the specific MSDS for questions regarding flammability limits.
|
|
|
|
|
|
Available
400 Series
Models:
|
