|
|
|
When the application requires a hooded type enclosure on the worksurface, the SS-340-DCH Ductless Fume Hood may be an excellent choice. This unit features unique hinged folding side panels, a high-density polyethylene base, a clear polycarbonate top and a hinged sloping front lid.
The powerful fan on top of the hood combines with a variety of Hepa filters and carbon filters to provide strong suction accross the inlet area. Typical uses may include capsule filling, powder filling, R&D, light grinding and a variety of applications involving chemical fumes and dusts.
Sentry Air's Ductless Fume Hood can provide an effective and economical solution for many commercial, medical, laboratory and industrial applications.
|
SPECIFICATIONS
| Hood Dimensions: |
O.D: 24"D x 42W" x 25"H
I.D.: 23.5"D x 40"W x 24"H |
| Hood Material: |
Sides: .250" White Acrylic
Base: .500" White High Density Polyethylene
Top: .500" Clear Polycarbonate
Front: .250" Clear Polycarbonate |
Blower Dimensions: |
13" L x 13" W x 13" H |
| Blower Material: |
16 ga. carbon steel w/ polyester epoxy coating on all surfaces |
| Total Weight: |
80 lbs. |
| Motor |
Fractional Horsepower, TEFC |
| Electrical: |
115/1/60, Approx. 2 amps |
| Sound Level |
61 to 66 dba (Blower Speed: Low to High) |
| Approximate Inlet Velocities (FPM): |
Pre-filter & 99.97% HEPA Filter-120 FPM High; 25 FPM Low
Pre-filter & Heavy-duty Carbon Filter-105 FPM High; 20 FPM Low |
| Warranty: | Limited one-year warranty from date of shipment on defects due to materials or workmanship. |
Max Operating Temperature: |
Not to exceed 170 degrees Fahrenheit |
| Patented Design: |
U.S. PATENT #5,843,197 |
|
All specifications are nominal and subject to change without notice.
Not intended for explosive, highly combustible applications.
|
|
|
|
|
|
Available
Ductless Fume Hoods:
|
