test


ESD-Safe Solder Fume Extractor

Stainless Steel Floor Sentry

Model # SS-100-FS-ST

ESD-Safe Solder Fume Extractor
Loading the player...

The Stainless Steel Floor Sentry is an ESD-Safe solder fume extractor that was engineered to free up much needed benchtop workspace. This unit is equipped with a self-supportive, anti-static flex hose that can be easily maneuvered by the operator while the base of the unit either sits on the floor or on the benchtop. The self-supportive hose allows the operator to comfortably adjust the hose to the optimal source-capture position.

This system is equipped with an energy-efficient fan and high-quality filtration media: typically HEPA or ASHRAE filtration. These filters are unique in that the primary materials have been constructed from fire-retardant products. HEPA filtration is up to 99.97% efficient on particles 0.3 microns and larger, while ASHRAE filtration is up to 95% efficient on particles 0.5 microns and larger.

The Stainless Steel Floor Sentry is an effective, quiet & economical solution for many soldering operations which require fume extraction. All of Sentry Air's products are proudly manufactured in the United States and are backed by our two-year limited warranty on parts and labor.

ESD-Safe Solder Fume Extractor
ESD-Safe Solder Fume Extractor
Specifications
Cabinet Dimensions:
8"L x 8"W x 8.25"H
Arm
Dimensions:
3" Round x 43" Long
Weight:
8 lbs.
Cabinet Material:
16 ga. stainless steel
Motor:
Fractional Horsepower
Available Filter Efficiencies:
HEPA Filter - Up to 99.97% efficient on particles down to 0.3 microns in size.
ASHRAE Filter - Up to 95% efficient on particles down to 0.5 microns in size.
ULPA Filter - Up to 99.9995% efficient on particles down to 0.12 microns in size.
Activated Carbon & Specialty-Blended Filters - Efficiency varies per chemical.
Air Volume:
Up to 80 CFM
Electrical:
115/1/60, .3 amps
220/1/50, .2 amps
Sound Level:
Approx. 62 dba @ 3' from inlet
Warranty:
Limited two-year warranty from date of shipment on defects due to materials or workmanship.
Patented Design:
U.S. PATENT #5,843,197

All specifications are nominal and subject to change without notice. Not intended for explosive or highly flammable applications. (i.e. when the Lower Flammability Limit is exceeded for any given chemical). Please consult the specific MSDS for questions regarding flammability limits.

Accessories

REPLACEMENT
FILTERS

100 Series (Up to 80 CFM)
200 Series (Up to 100 CFM)
300 Series (Up to 350 CFM)
400 Series (Up to 700 CFM)
450 Series (Up to 950 CFM)
500 Series (Up to 1300 CFM)
Extractor Arms (Exhaust Hoses)
Accessories (For All Products)

Additional Configurations
100 Series - Up To 80 CFM