|
|
SS-400-WFE & SS-450-WFE
Testimonials
|
Edker Industries, Inc. purchased a Model 400 Welding Fume Extractor for use when welding stainless steel.
"Last summer, OSHA placed an air sampling device on our employee while he was welding stainless steel. It was a relief when the results came back 'None Detected' for Chromium VI and Chromic acid. The fines from one incident would have probably been more than the cost of the Sentry Air filtration unit. Obviously it was money well spent. Not only from the savings on possible fines but also the appreciation from employees when they know we care enough about their health and safety to purchase top notch safety equipment."
Tom Kerbaugh
Edker Industries, Inc
Cinnaminson, NJ
|
|
“In our machine shop, we perform a number of operations including milling, lathing, welding and soldering/brazing. Most recently we were tasked with milling a bunch of 3/4" thick plate steel. The resulting smoke and smell from the cutting oil was overwhelming. We tried to ventilate the room with fans but it was ineffective due to our shop being air conditioned within another larger shop. I decided to look for a portable air cleaner which could be used for all tasks. After looking at several different manufacturers, it became obvious the SS-400-WFE portable air cleaner was far and beyond the one to get given its compact size & portability, low noise, good airflow, low power consumption, and versatility. After receiving our SS-400-WFE, I'm happy to report smoke and smell are things of the past. The SS-400-WFE completely eliminated both. The design is elegantly simple and it’s also well built and should last for many years to come.
We also have very restrictive procurement rules and Sentry's sales engineer, McKay, was very helpful and patient in making it happen.”
Mitch Pinkerton
University of Hawaii
Honolulu, HI |
|
|
|
|
|
|
Researchers
Working With...
Bloggers
A Letter
from the President
Green
|
